MCP6S93-E/UN, SP Amp Variable Gain Amp Single R-R I/O 5.5V 10-Pin MSOP Tube /Код si-851478

The MCP6S93-E/UN is an analog Programmable Gain Amplifier (PGA) for use with multiplexed analog applications. It can be configured for gains from +1V/V to +32V/V and the input multiplexer can select one of up to two channels through a SPI port. The serial interface can also put the PGA into shutdown to conserve power. This PGA is optimized for high-speed, low offset voltage and single-supply operation with rail-to-rail input and output capability. These specifications support single supply applications needing flexible performance or multiple inputs. • Serial peripheral interface (SPI™)• Rail-to-rail input and output• ±1% Maximum low gain error• 1mA Typical low supply current

Диапазон Напряжения Питания	2.5В до 5.5В
Количество Выводов	10вывод(-ов)
Количество Каналов	2канал(-ов)
Количество Усилителей	1 Усилитель
Максимальная Рабочая Температура	125 C
Минимальная Рабочая Температура	-40 C
Полоса Пропускания	18МГц
Стиль Корпуса Усилителя	MSOP
Уровень Чувствительности к Влажности (MSL)	MSL 1-Безлимитный
Dual Supply Voltage (Max)	Not Required(V)
Dual Supply Voltage (Min)	Not Required(V)
Dual Supply Voltage (Typ)	Not Required(V)
Input Bias Current	0.001(nA)
Input Offset Voltage	4(mV)
Input Resistance	10000000(MOhm)
Mounting	Surface Mount
Number of Elements	1
Number of Channels	1
Operating Temp Range	-40C to 125C
Operating Temperature Classification	Automotive
Package Type	MSOP
Packaging	Rail/Tube
Pin Count	10
Power Supply Rejection Ratio	70(dB)
Power Supply Requirement	Single
Rad Hardened	No
Single Supply Voltage (Max)	5.5(V)
Single Supply Voltage (Min)	2.5(V)
Single Supply Voltage (Typ)	3/5(V)
Voltage Gain dB	30.1(dB)